3000 Litre Thin Tank

Length: 2920mm
Height: 1970mm
Width: 580mm


Optional Accessories
Bucket Outlet = $55.00
Leaf Eater = $70.00
First Flush Diverter = FREE with Installation
Free Standing Brackets = $90.00 Per Set

Outstanding features of the 3000L Thintanks™ include:

  • Made of a solid one piece construct for maximum strength
  • Vertical and horizontal ribs with the cross connectors – Additional support to contain expansion when filled with rainwater
  • Fitted with 2 brass 25mm outlets at the bottom to allow easy interlinking of tanks – Maximise required water collection capabilities
  • Australian made and manufactured from 100% U.V stabilised, food grade polyethylene resin

First Flush Rainwater Diverter – We recommend a 1st flush system be connected when installing your rainwater tank. The 1st flush system is connected to the downpipe and takes the first flow of water which may contain contaminants from the roof and gutters and seals it off, then automatically diverts the remaining flow to the tank. A slow release valve ensures the chamber empties itself after rain and resets automatically. We recommend cleaning it out after a rain or prior to the next rain. It improves water quality and protects pumps and internal appliances. We install a First Flush Diverter free with all our installation packages.

Leaf Eater – The leaf eater prevents debris from entering the Rain Harvesting system, improves water quality and reduces tank maintenance. Most tanks have a leaf litter screen at the inlet point, but if a tank is not using the provided inlet point, the leafeater will do the job. This may apply when height is an issue and the inlet needs to be made in to a side entry point. 

Free Standing Base Bracket – The free-standing base brackets require a suitable depth concrete footing or tank pad to secure a rated anchor bolt in to. Our engineer recommends a tank pad of 150mm concrete depth for installations. Base brackets will not be effective on pavers.

Bucket Outlet – A Bucket Outlet can be requested when ordering if the customer wishes to attach a filter to fill a jug for drinking. Remember, the Slim Thin rainwater tanks are made of food grade polyethylene so if the proper filter is used, the rainwater collected is safe to drink. The bucket outlet is installed at approximately 400mm from the ground to allow enough room for a bucket to fit under the tap.

Call Clayton to discuss your requirements. Mobile: 0417 436 037

Like and Follow Us
  • 7