The Thinpots Vertical Garden System is the specifically designed planter pots to complement the FULL Thintanks™ range.
Thinpots are designed to hang on the front of the Thintanks™ by clipping directly onto the irrigation pipe that is supported by concealed clips inserted into the cross wall connection voids in the Thintanks™.
Thin Pots Version 1
The original Thin Pots design was made for the original 1000L and 2000L Thin Tanks. This version still works with the original 1000L Thin Tank as well as the Thin Pots Mobile Frame and the Thin Pots Fence Frame
Thin Pots Version 2
Thin Pots Version 2 fits all the Series 2 tanks in the Thin Tanks range
The Thinpots Vertical Garden System has a penetration at the top to allow for an irrigation dripper to be installed and have two small drainage holes in the bottom. Each Thin Pot planter will be fed by a drip irrigation system which will be built into the current horizontal grooves on the Thin Tanks using a Toro NGE 2L?H drip emitter to ensure that every pot consistently gets the same amount of water. Gravity alone is not enough to water the pots from the tank, so a pump will be required to use the tank water. Otherwise you can connect your irrigation system to a garden tap.
The Existing cross-wall connection plugs are replaced with connectors [sold with the Thin pots], 13mm irrigation pipe is clipped on, and then the Thin Pots are hung from the irrigation pipe.
The Thin Pot Vertical Garden will make your Thin Tank more than just a water tank – it will become a tank that grows, a living green wall.
1000L Original Thin Pots Confirguration
42 Thin Pots will cover the enitre tank with 48 connectors
There are 7 x Thin Pots per row and 8 connectors
3 rows = 21 Thin Pots and 24 connectors
1000L and 2000L Series 2 Thin Pots Configuration
40 Thin Pots will cover the entire Tank with 25 connectors
There are 8 x Thin Pots per row and 5 connectors
3 rows = 24 Thin Pots and 15 connectors
3000L and 4000L Series 2 Thin Pots Configuration
50 Thin Pots will cover the entire Tank with 30 connectors
There are 10 x Thin Pots per row and 6 connectors
3 rows = 30 Thin Pots and 18 connectors
500L Series 2 Thin Pots Configuration
12 Thin Pots will cover the entire Tank
There are 4 x Thin Pots per row and 3 connectors
3 rows = 12 Thin Pots and 9 connectors
